VIP NVR16PRO3NP Guía de instalación descargar pdf (Pagina 13)

To Set Up Recording Rates

Right click to open the menu and select MAIN MENU, then select SETTINGS followed by ENCODE.

Here you may can set set individual encoding options for Regular, Motion Detect and Alarm Recording.

While any of the cameras may be set higher, please be aware that it will reduce the total recording time

to less than 2 weeks. We recommend:

1MP cameras: Set to H.264 with a 1280x720 resolution, 10fps, Bit Rate CBR of 1536kbps.

2MP cameras: Set to H.264 with a 1920x1080 resolution, 10fps, Bit Rate CBR of 2048kbps.

3MP cameras: Set to H.264 with a 2048x1536 resolution, 10fps, Bit Rate CBR of 4096kbps.

Important: The EXTRA STREAM MUST be enabled if you wish to remote access the NVR system.

All cameras: Set to H.264 with a CIF resolution, 10fps, Bit Rate CBR of 320kbps.

To Begin Recording

Once you have successfully set up the cameras, exit the Menu by right clicking or pressing the CLOSE

button. By default, the NVR will begin recording when it is properly connected to the cameras and has an

installed HDD. If it is recording, the recording icon “ ” will be displayed on screen.

Automatic Overwriting:

When the system is in full, the oldest recorded data will be overwritten automatically. This NVR

System is set to Overwrite by factory default but can be changed in the “GENERAL” Menu.

Record Times:

The NVR8PROPACK2NP system is capable of storing up to 1 week of recorded footage based on

2Tb of storage and the 16 included 1.3MP Cameras set to 720P @ 10fps and CBR @ 1536kb/s

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Sin comentarios

VIP NVR16PRO3NP Guía de instalación Pagina 13